3M9888T sided adhesive is non-woven substrate double-sided adhesive, glue made from non-woven fabric coated on both sides hope propionic acid, tape color is translucent white, specifications for: 1219MM * 55M * 0.15MMT, durability, the temperature is good, short-term temperature resistance 150 ℃, long-term temperature resistance 120 ℃; waterproof, good elasticity, tack and tack holding, good dimensional stability, release paper release paper is white with a red " 3M "LOGO; easy cutting and processing of plastics, rubber, nameplates have good adhesion. Peel Strength: 1,90 degree peel degree (N / 100MM), Test Method: ASTM D3330 test values ??ABS acrylic stainless steel 484 243 Applications: 3M9888T to achieve the best bonding results, the bonding surface must be clean, drying, the tape is applied optimal temperature range 21-38 ℃, if the initial bonding temperature below recommended 10 ℃, suitable adhesive, so when the adhesive is too hard, and can not be firmly bonded to the object; However, if you have the adhesive on, and holding tack at low temperatures is also satisfactory. Applications: 3M9888T environmental aspects in line with double-sided adhesive ROHS, halogen, PFOS / PFOA environmental regulations, the scope: For nameplate, ABS decorative panels, plastic signs bonding and adhesive rubber feet. 3M467 is in a double-sided adhesive 3M double-sided adhesive substrate-free, made from C Xi acid gel directly coated tape color is transparent, is 3M200MP series Adhesive, specifications for: 1219MM * 55M * 0.06MMT, the thickness of the relatively thin, still has excellent adhesion effect, to prevent loss and excellent waterproof performance, processing 3M467, good temperature resistance, better hold tack; release paper for the polymer coating waterproof kraft paper, in humidity environment is not wrinkled; the temperature is good, long-term temperature 149 ℃, short-term temperature up to 204 ℃; the bonding strength with the sticky surface contact area increases with increasing adhesive, applied steady pressure to help in contact with the sticky adhesive surface, thereby increasing the bonding strength. For best bonding results, the bonding surface must be clean, dry and tape applied optimal temperature range is 21-38 ℃, recommended if the initial bonding temperature below 10 ℃, suitable adhesive, so When the adhesive is too hard, and can not be firmly adhered to the object; however, if the adhesive already on, holding tack at low temperature also is satisfactory. 3M467 double-sided adhesive in compliance with ROHS environmental regulatory requirements, for at 21 ℃ and 50% relative humidity conditions, the original packaging state panel paste, metal nameplates, membrane switches, electrical parts, shockproof foam paste and other shelf-life Since the date of manufacture shelf life of 24 months