3M610 test tape is widely used in screen printing, color printing and other processes. Attorney its ink adhesion, is a standard test methods, such as: printed circuit board applications: electronic products silk, printing test rubber Features: Viscous stable, big stick strength, international standard test tape dump oil test methods: 1. Purpose: assessment products paint adhesion coating. 2. Scope: The product has injector / printing / hot stamping / silk section. 3. Equipment: 3M610 tape, Jiedao 4.1 before the test must ensure that the paint is completely dry surface coating with 4.2 Jiedao will quit out of the paint surface parallel lines spaced 1 / 16¨ of 11 and then hang the ring into the same parallel lines 11 ( to quit broken pieces of plastic paint coating does not hurt as standard). 4.3 The test tape affixed to the notch surface (tape ends should grow notch 1 / 2¨ long to play a bit), with a finger pressed adhesive tape so that no internal air / and maintain 90 ± 30 seconds. 4.4 to be parallel to the surface of the paint coating tape pull angle of 180 degrees. 5.1 out of oil more than 10% the number of cells is a serious problem. 5.2 out of cell number did not played five percent of the general problem. Adhesion to steel:. 43oz / in. Width (width of 47 N / 100 mm) transverse tensile strength: 23 lbs / (width of 402 n / 100MM) Elongation at break: 15% Tape thickness: 1 .43m il (0 .036 mm) of Total: 2.3 mil (0.058 mm) of